"R" Steel Drum
ACCESSORIES
In STOCK
"R"
Steel Drum Stands
"R" One of a Kind...
We at Rhythmical Steel are every proud of "R" Steel Drum Stands!
We specifically
designed these stands to be used for Steel Drum Instruments! These awesome looking stands are
very sturdy, easy
to move around without them collapsing unexpectedly. These stands are extremely compact, being
able to stack numbers of them together in a corner without taking up much space. There are
No Hassles of having to assemble or disassemble before or after use. Our stands have plastic
protective
caps on top to prevent wires from being cut. On the bottom of the stands the three legs
have black rubber skid and scratch resistant floor protectors.
The Price of our Rhythmical
Steel Drum Stands are an incredible low price of $65.00 each! To top that we will
give a quantity discount of $10.00 off on each stand when 4 or more are ordered at a time!
Rhythmical Steel also carries LEGS for the low end steel drum instruments. These are metal
legs with pre-drilled holes and have super pinky rubber balls for the feet. The rubber balls
gives the instrument the cushioned
support that is needed by the low end instruments to allow them to vibrate freely.
So why hassle with stands,
for 9 legs our price is $55.00.
You may purchase Super Pinky Rubber
Balls with the holes already pre-drilled , the cost is $1.55 each.
Rhythmical Steel Home Page
Rhythmical Steel Drum Mallets
Rhythmical Steel carries a full stock
of different sizes of steel drum mallets
and mallet tips.
All mallets are sold in pairs. We use aluminum for the shafts of the mallets, and use latex
surgical tubing for the high end and mid range mallet tips. For the low end instruments
we precisely grind the right shape from firm super pinkie rubber balls for bass heads and
tenor bass heads. For the ends of all Rhythmical Steel mallets
we use latex rubber which is comfortable, helps keep mallets from slipping, and is quite when placing
the mallets down in the instruments. Note: Mallets for the * Orff * sized steel drum instruments
we use all wood shafts.
It is important to change mallet tips often to get the best over all sound from
your steel drum instruments.
| Bass Mallets $19.50
Bass Mallet Replacement Tips
(pkg. of 2)
$10.00
| Tenor Bass Mallets $19.50
Tenor Bass Mallet Replacement Tips
(pkg. of 2) $10.00
g g g g g g g g g g g g g g g g g g g g g
| Triple Guitar Mallets $15.00
Triple Guitar Mallet Replacement Tips
(pkg. of 2) $4.50
| Cello Mallets $15.00
Cello Mallet Replacement Tips
(pkg. of 2) $4.50
| Double Seconds Mallets $12.75
Double Seconds Mallet Replacement Tips
(pkg. of 6) $3.00
| Double Tenor Mallets $12.75
Double Tenor Mallet Replacement Tips
(pkg. of 6) $3.00
| Lead Mallets $12.00
Lead Mallet Replacement Tips
(pkg. of 6) $2.00
| Double Bass Mallets $12.00
(for Orff Sized Steel Drum Instruments)
Double Bass Mallet Replacement Tips
(pkg. of 2) $4.50
| Alto Pan Mallets $10.00
(for Orff Sized Steel Drum Instruments)
Alto Pan Mallet Replacement Tips
(pkg. of 6) $3.00
| | | | | | | | |
Rhythmical Steel
Has
The Tool!
It is important to change your mallet tips often so you will
get the best over all sound from your steel drum instrument. This New Tool carried by Rhythmical Steel will
make replacing mallet tips a breeze! No more spending countless hours fighting and having tips
fly across the room while trying to replace them. The Tool is very easy to use! Simply, slip the new
latex tip over the end of the 4 metal prongs, dip in water, squeeze, then slip the tip over the end of the mallet shaft.
This tool is an absolute must for everyone who is seriously into steel drums!
Rhythmical Steel has The Tool in stock for $18.75
These prices do not include sales taxes or shipping and handling charges.
Rhythmical Steel Home Page
If you have questions, please e-mail us at:
rsteel@rhythmicalsteel.com